Rtech USB3000 Manual do Utilizador Página 1

RT USB3000 Technical Description and User Manual. Revision 4.1. Contacts: http://www.RTechElectronics.com [email protected] - Common q

RT USB3000 Technical Description and User Manual Rev. 4.1. 10 of 185. Connecting the device The figure shows the front panel of a RT USB3000 dev

RT USB3000 Technical Description and User Manual Rev. 4.1. 11 of 18The procedure of connecting the RT USB3000 device is as follows: 1. If you a

RT USB3000 Technical Description and User Manual Rev. 4.1. 12 of 18In the Device Manager RT USB3000 will appear as Unknown device. You should rig

RT USB3000 Technical Description and User Manual Rev. 4.1. 13 of 18 You should select “Browse my computer for driver software” and specify the “\

RT USB3000 Technical Description and User Manual Rev. 4.1. 14 of 185.2. Connecting to the object 5.2.1. Connecting to the Analog Port The analog

RT USB3000 Technical Description and User Manual Rev. 4.1. 15 of 18The analog inputs of the RT USB3000 device are differential. Differential conn

RT USB3000 Technical Description and User Manual Rev. 4.1. 16 of 185.2.2. Connecting to the Digital Port The digital port of the device is descr

RT USB3000 Technical Description and User Manual Rev. 4.1. 17 of 186. Software Software of the RT USB3000 device consists of the following compo

RT USB3000 Technical Description and User Manual Rev. 4.1. 18 of 186.2. Software development kit Apart from the complete QMLab software suite,

RT USB3000 Technical Description and User Manual Rev. 4.1. 2 of 181. General information The RT USB3000 device is a compact multipurpose eight-c

RT USB3000 Technical Description and User Manual Rev. 4.1. 3 of 182. Specifications Analog-to-Digital Converter (ADC) Number of input channels

RT USB3000 Technical Description and User Manual Rev. 4.1. 4 of 18Power supply From the USB bus or the external source1Consumed current Up to 4

RT USB3000 Technical Description and User Manual Rev. 4.1. 5 of 18 Fig. 2. Harmonic distortion. Input signal - sine-wave 10 kHz, 5V. fADC = 3MHz.

RT USB3000 Technical Description and User Manual Rev. 4.1. 6 of 18-100-90-80-70-60-50-40-30-20-100012Frequencies of channel switching, МHzCrossta

RT USB3000 Technical Description and User Manual Rev. 4.1. 7 of 183. Operating modes The device hardware solution and standard software make it

RT USB3000 Technical Description and User Manual Rev. 4.1. 8 of 183.3. “Logic Analyzer” mode In the “Logic Analyzer” mode RT USB3000 device pro

RT USB3000 Technical Description and User Manual Rev. 4.1. 9 of 184. Synchronization 4.1. Start synchronization By default the device starts t