Rtech PROArc 175 Especificações Página 1

www.r-techwelding.co.uk Email: [email protected] Tel: 01452 733933 Fax: 01452 733939 ProArc 175 INVERTER ARC WELDER OPERATION INS

10 Operating machine SAFETY PRECAUTIONS WARNING! ELECTRIC SHOCK CAN KILL Do not touch electrically live parts or electrode with skin or wet

11 Operating Machine MMA mode 1. Ensure machine is setup as previously stated 2. Fit desired electrode size in electrode holder 3. Switch on mac

12 Troubleshooting Service & repair should only be performed by R-Tech welding trained personnel. Unauthorised repairs performed on this equipme

13 Arc welding problems 1. Stick electrode ‘blasts off’ when arc is struck Welding current set too high, reduce welding current Materials are di

14

15

2

3 Thank you for selecting the R-Tech PROARC175 Inverter Arc Welder The PROARC175 has many benefits over traditional transformer arc welders, includi

4 The R-Tech PROARC175 is a member of our field acclaimed family of welding products. Premium features include:- 1. Inverter power source – more

5 Safety Precautions Read entire section before starting installation WARNING! Electric Shock can kill – Only qualified personnel should perform

6 Machine grounding and Interference Protection This welder must be grounded to earth. See national electrical codes for proper grounding methods.

7 Allow machine to sit for 5 minutes minimum to allow the power capacitors to discharge before working inside this equipment. Do not touch electrica

8 Rear machine connections Fig 2 1. On / Off Switch This switches machine on /off 2. Mains input cable Connect electrical plug as required

9 Controls and Settings 1. Current Control Knob This selects the welding power and is shown in LED display (3) 2. Warning indicator light Li