Rtech TIG201 Especificações descarregar pdf (Página 11)

Controls and Settings

Fig 4

1. Base current control

This adjusts the main welding current and is shown in L.E.D (Fig 4.11)

2. Pulse peak current adjustment

This sets pulse amperage and must be set above the base (main) current amperage. If set

to zero pulse welding is disabled.

3. Pulse frequency adjustment

This sets how often pulse will occur 0.5 – 25hz

4. Up slope

Adjustment 0-10 seconds. The main welding current raises from minimum amperage to

main current selected in time selected when weld started

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Sem comentários

Rtech TIG201 Especificações Página 11